• Follow us
API 17D Type SBX And SRX Subsea Ring Joint Gasket

API 17D Type SBX And SRX Subsea Ring Joint Gasket

Specifications Ring Joint Gaskets -Type SBX & SRX Ginseal RTJ gaskets are designed to seal by "initial line contact" or wedging action between the mating flange and the gasket. Usually used in oil, petroleum and chemical process fields. Precision machined, metallic sealing rings...

Description

Specifications

Ring Joint Gaskets -Type SBX & SRX

Ginseal RTJ gaskets are designed to seal by "initial line contact" or wedging action between the mating flange and the gasket. Usually used in oil, petroleum and chemical process fields. Precision machined, metallic sealing rings suitable for high pressure and high temperature applications. 

GINSEAL RTJs are manufactured in accordance with API - 6A,API 17D and ASME B16.20 specifications and come in six basic profiles: R oval, R octagonal, RX, and BX ,SRX,SBX

Type SBX  / SRX

Item No.: JSG - RJ SBX/ RT SRX 

Type SRX and SBX gaskets are manufactured as per API 17D for Subsea enviroment and Tree Equipment are vented to prevent pressure lock when connections are made up underwater. They have same dimensions as Type RX & BX ring joint gasket, and also they are suitable to  the same corresponding connectors. The "S" prefix shows these gaskets have vent holes, allowing a pressure less when under water. With the vent holes, any water trapped between a ring groove bottom and the sealing area of the gasket can escape to the equipment I.D. bore.

Material 

Soft Iron, Low Carbon Steel, Stainless Steel 304, Stainless Steel 304L, Stainless Steel 316, Stainless Steel 316L, Stainless Steel 321, Stainless Steel 347, Stainless Steel 410, Aluminum, Copper, Brass, Nickel 200, Monel 400, Inconel 600, Hastelloy B2, Titanium (see more information in our products catalogue) 

Marking (standard): 

- Manufacturer 

- Nominal Size 

- Material 

- Manufactured to (standard)

Further materials available upon request

Specifications

We deliver according to the following standards: EN 1514-2, 12560-6 Suitable for flanges according ASME B 16.20, ASME B 16.47 Series A, ANSI B 16.5, BS 1560,BS EN 1092, DIN, JIS and NF


GINSEAL is one of the leading manufacturers and suppliers of api 17d type sbx and srx subsea ring joint gasket in China, which is equipped with a productive factory. Thanks to process improvement and professional training, we're now able to offer quality sealing products at low price. Welcome to buy our discount products and check the pricelist with us.

Related Products

Feedback