• Follow us
Japan Customers' Satisfied RIR Type Japan Spiral Wound Gasket with Carbon Steel Rings

Japan Customers' Satisfied RIR Type Japan Spiral Wound Gasket with Carbon Steel Rings

Specifications Spiral wound gaskets - RIR Type Description Ginseal Spiral wound gaskets are composed of a steel (inner &.outer )rings and a spiral sealing strip with non-metallic winding ,and all material are alternative according to the chemical compatibility. Its function is depend on the...

Description

Specifications

Spiral wound gaskets - RIR Type

Description

Ginseal Spiral wound gaskets are composed of a steel (inner &.outer )rings and a spiral sealing strip with non-metallic winding ,and all material are alternative according to the chemical compatibility. Its function is depend on the V-formed metal spiral strip’s mechanical characteristics.

Ginseal provides CGI type (with inner ring & outer ring), CG type (only with outer ring), R type (without inner & outer ring), RIR type (only with inner ring) and also in monel, inconel, alloy and other material. These gaskets are proved to be suitable in most applications, and allow lower clamping forces than solid gaskets, albeit with a higher cost.

RIR Type Spiral Wound Gasket:

Item no.: JSG - SW40

SWG with only inner ring &.without outer ring, it’s suitable for male and female flange. 

Material for rings:

Low Carbon Steel, SS304, 304L, SS316, SS316L, SS321, SS347, SS 410, Aluminium , Copper, Brass, Nickel 200, Monel 400, Inconel 600/625/800, Hastelloy B2, Titanium

 (see more information in our products catalogue)

How to choose Filler

The important part is the sealing element (also called filler) made up of V-formed SS strip and non- metallic filling tape, the material can be changed according to different chemical compatibility requirements.

Graphite filling strip is good to be used in high temperature environment,

PTFE filling strip is for acids and other corrosive mediums

Non-asbestos’ use is increased when the health problems with asbestos became known. But it’s only recommended for low temperature less severe applications due to the rubber content.

Ceramic is in extremely high temperature applications. The filler is not so common as it cannot achieve the same leak tightness as graphite

Marking (standard):

Marking on outer ring:

- Manufacturer

- Nominal Size - Pressure Range

- Winding material + Filler Material

- Manufactured to (standard)

For example: GINSEAL 2”150# SS304/SS304+F.G./CS ASME B16.20

Specifications

We deliver according to the following standards: ASME B16.20, ASME B16.47 Series A & Series B, ANSI B16.5, BS1560, BS EN1092, DIN, JIS, etc.

How to order

1 -- Nominal pipe size or specific gasket dimensions

2 -- Pressure rating

3 -- winding and filler materials

4 -- centering / outer ring or inner ring material

Package &. Shipping:

Further materials available upon request





GINSEAL is one of the leading manufacturers and suppliers of japan customers' satisfied rir type japan spiral wound gasket with carbon steel rings in China, which is equipped with a productive factory. Thanks to process improvement and professional training, we're now able to offer quality sealing products at low price. Welcome to buy our discount products and check the pricelist with us.

Related Products

Feedback